4 Unconventional Procedures to Repair Hail Damage on Your Car

Every year due to the hailstorms, not only a lot of cars get damaged, but the roofs also get damaged a lot. Well, you cannot ignore the natural calamities like hailstorms. What you can do is take necessary precautions from your side so that the car or roof doesn’t get damaged or if it does, you can repair it. Many procedures to repair a hail damaged car are currently available in the market. You can find all about those tips on hail damage repair - http://www.cardentsandhailrepairs.com/ and similar websites offer. Though here in this article, some of the most unconventional procedures are mentioned. Read on to know more about them.

Paint-less Dent Repair (PDR)

One of the most commonly used methods to repair hail damage is paint-less dent repair. If you use this method, there is no necessity to replace a damaged part. In this process, with the help of the necessary tools the professionals get behind the dent and “massage” the dent out. The tools that are used in this method are a bit expensive. Moreover, without great expertise in handling the tools, it is nearly impossible to repair a dent using this method.

Remove & Replace (R&R)

If any part gets heavily damaged by hail, sometimes it is better to replace the part instead of getting it repaired. The bolt-on parts like fenders, trunk lids, hoods etc. can be easily replaced. You can find effective tips on Hail Damage Repair – http://www.cardentsandhailrepairs.com/ websites recommend. Unless you know everything on replacing or removing those parts, you might end up paying more labour cost while repairing it! Usually, if you go for replacement of these parts, you can save a bit of money.

Old School Damage Repairing Method

Most of the times, this old school method is used for the restoration of the older cars that have a thicker metal body. If you choose the procedure of repairing to fix your hail damaged car, you might observe that heat is used to expand the metal. The experts use the oxyacetylene torch to heat the metal in the spiral motion around the dented spot. Once the metal body raises, slightly tap the raised area with something like a body hammer so that the metal can relax. Thus, the damages made by hails can be easily repaired using this old school method.

Traditional Repairing Method

Another popular method that is used to repair the damages made by hail is – body filler. Hail Damage Repair – http://www.cardentsandhailrepairs.com/ websites suggest some of the traditional procedures of repairing your damaged car.

·        Wash and clean the area to be repaired.

·        Remove the coatings using a 50-grit grinder. Alternatively, a dual action sander can also be used.

·        In order to prepare the body filler, blow the area to be repaired with compressed air.

·        Mix well and apply the body filler on the metal area only; be careful not to apply it on the paint.

·        Using the sandpaper of 80-grit that is followed by 150-grit, the body filler is blocked.

Conclusion

If you are wondering where to look for services to repair hail damage, or whom to ask for guidance, do not worry at all. You can go through the websites like http://www.cardentsandhailrepairs.com/ for gathering some idea on such repairing services and choose the most feasible option for yourself.

Leave a Reply

Your email address will not be published. Required fields are marked *